diff --git a/library/log4php/configurators/LoggerConfigurationAdapterINI.php b/library/log4php/configurators/LoggerConfigurationAdapterINI.php
deleted file mode 100644
--- a/library/log4php/configurators/LoggerConfigurationAdapterINI.php
+++ /dev/null
@@ -1,291 +0,0 @@
-<?php
-/**
- * Licensed to the Apache Software Foundation (ASF) under one or more
- * contributor license agreements. See the NOTICE file distributed with
- * this work for additional information regarding copyright ownership.
- * The ASF licenses this file to You under the Apache License, Version 2.0
- * (the "License"); you may not use this file except in compliance with
- * the License. You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- * @package log4php
- */
-
-/**
- * Converts ini configuration files to a PHP array.
- *
- * These used to be called "properties" files (inherited from log4j), and that
- * file extension is still supported.
- *
- * @package log4php
- * @subpackage configurators
- * @license http://www.apache.org/licenses/LICENSE-2.0 Apache License, Version 2.0
- * @version $Revision: 1343601 $
- * @since 2.2
- */
-class LoggerConfigurationAdapterINI implements LoggerConfigurationAdapter {
-
-    /** Name to assign to the root logger. */
-    const ROOT_LOGGER_NAME = "root";
-
-    /** Prefix used for defining logger additivity. */
-    const ADDITIVITY_PREFIX = "log4php.additivity.";
-
-    /** Prefix used for defining logger threshold. */
-    const THRESHOLD_PREFIX = "log4php.threshold";
-
-    /** Prefix used for defining the root logger. */
-    const ROOT_LOGGER_PREFIX = "log4php.rootLogger";
-
-    /** Prefix used for defining a logger. */
-    const LOGGER_PREFIX = "log4php.logger.";
-
-    /** Prefix used for defining an appender. */
-    const APPENDER_PREFIX = "log4php.appender.";
-
-    /** Prefix used for defining a renderer. */
-    const RENDERER_PREFIX = "log4php.renderer.";
-
-    /** Holds the configuration. */
-    private $config = array();
-
-    /**
-     * Loads and parses the INI configuration file.
-     *
-     * @param string $url Path to the config file.
-     * @throws LoggerException
-     */
-    private function load($url) {
-        if (!file_exists($url)) {
-            throw new LoggerException("File [$url] does not exist.");
-        }
-
-        $properties = @parse_ini_file($url, true);
-        if ($properties === false) {
-            $error = error_get_last();
-            throw new LoggerException("Error parsing configuration file: {$error['message']}");
-        }
-
-        return $properties;
-    }
-
-    /**
-     * Converts the provided INI configuration file to a PHP array config.
-     *
-     * @param string $path Path to the config file.
-     * @throws LoggerException If the file cannot be loaded or parsed.
-     */
-    public function convert($path) {
-        // Load the configuration
-        $properties = $this->load($path);
-
-        // Parse threshold
-        if (isset($properties[self::THRESHOLD_PREFIX])) {
-            $this->config['threshold'] = $properties[self::THRESHOLD_PREFIX];
-        }
-
-        // Parse root logger
-        if (isset($properties[self::ROOT_LOGGER_PREFIX])) {
-            $this->parseLogger($properties[self::ROOT_LOGGER_PREFIX], self::ROOT_LOGGER_NAME);
-        }
-
-        $appenders = array();
-
-        foreach ($properties as $key => $value) {
-            // Parse loggers
-            if ($this->beginsWith($key, self::LOGGER_PREFIX)) {
-                $name = substr($key, strlen(self::LOGGER_PREFIX));
-                $this->parseLogger($value, $name);
-            }
-
-            // Parse additivity
-            if ($this->beginsWith($key, self::ADDITIVITY_PREFIX)) {
-                $name = substr($key, strlen(self::ADDITIVITY_PREFIX));
-                $this->config['loggers'][$name]['additivity'] = $value;
-            } // Parse appenders
-            else if ($this->beginsWith($key, self::APPENDER_PREFIX)) {
-                $this->parseAppender($key, $value);
-            } // Parse renderers
-            else if ($this->beginsWith($key, self::RENDERER_PREFIX)) {
-                $this->parseRenderer($key, $value);
-            }
-        }
-
-        return $this->config;
-    }
-
-
-    /**
-     * Parses a logger definition.
-     *
-     * Loggers are defined in the following manner:
-     * <pre>
-     * log4php.logger.<name> = [<level>], [<appender-ref>, <appender-ref>, ...]
-     * </pre>
-     *
-     * @param string $value The configuration value (level and appender-refs).
-     * @param string $name Logger name.
-     */
-    private function parseLogger($value, $name) {
-        // Value is divided by commas
-        $parts = explode(',', $value);
-        if (empty($value) || empty($parts)) {
-            return;
-        }
-
-        // The first value is the logger level
-        $level = array_shift($parts);
-
-        // The remaining values are appender references
-        $appenders = array();
-        while ($appender = array_shift($parts)) {
-            $appender = trim($appender);
-            if (!empty($appender)) {
-                $appenders[] = trim($appender);
-            }
-        }
-
-        // Find the target configuration
-        if ($name == self::ROOT_LOGGER_NAME) {
-            $this->config['rootLogger']['level'] = trim($level);
-            $this->config['rootLogger']['appenders'] = $appenders;
-        } else {
-            $this->config['loggers'][$name]['level'] = trim($level);
-            $this->config['loggers'][$name]['appenders'] = $appenders;
-        }
-    }
-
-    /**
-     * Parses an configuration line pertaining to an appender.
-     *
-     * Parses the following patterns:
-     *
-     * Appender class:
-     * <pre>
-     * log4php.appender.<name> = <class>
-     * </pre>
-     *
-     * Appender parameter:
-     * <pre>
-     * log4php.appender.<name>.<param> = <value>
-     * </pre>
-     *
-     * Appender threshold:
-     * <pre>
-     * log4php.appender.<name>.threshold = <level>
-     * </pre>
-     *
-     * Appender layout:
-     * <pre>
-     * log4php.appender.<name>.layout = <layoutClass>
-     * </pre>
-     *
-     * Layout parameter:
-     * <pre>
-     * log4php.appender.<name>.layout.<param> = <value>
-     * </pre>
-     *
-     * For example, a full appender config might look like:
-     * <pre>
-     * log4php.appender.myAppender = LoggerAppenderConsole
-     * log4php.appender.myAppender.threshold = info
-     * log4php.appender.myAppender.target = stdout
-     * log4php.appender.myAppender.layout = LoggerLayoutPattern
-     * log4php.appender.myAppender.layout.conversionPattern = "%d %c: %m%n"
-     * </pre>
-     *
-     * After parsing all these options, the following configuration can be
-     * found under $this->config['appenders']['myAppender']:
-     * <pre>
-     * array(
-     *    'class' => LoggerAppenderConsole,
-     *    'threshold' => info,
-     *    'params' => array(
-     *        'target' => 'stdout'
-     *    ),
-     *    'layout' => array(
-     *        'class' => 'LoggerAppenderConsole',
-     *        'params' => array(
-     *            'conversionPattern' => '%d %c: %m%n'
-     *        )
-     *    )
-     * )
-     * </pre>
-     *
-     * @param string $key
-     * @param string $value
-     */
-    private function parseAppender($key, $value) {
-
-        // Remove the appender prefix from key
-        $subKey = substr($key, strlen(self::APPENDER_PREFIX));
-
-        // Divide the string by dots
-        $parts = explode('.', $subKey);
-        $count = count($parts);
-
-        // The first part is always the appender name
-        $name = trim($parts[0]);
-
-        // Only one part - this line defines the appender class
-        if ($count == 1) {
-            $this->config['appenders'][$name]['class'] = $value;
-            return;
-        } // Two parts - either a parameter, a threshold or layout class
-        else if ($count == 2) {
-
-            if ($parts[1] == 'layout') {
-                $this->config['appenders'][$name]['layout']['class'] = $value;
-                return;
-            } else if ($parts[1] == 'threshold') {
-                $this->config['appenders'][$name]['threshold'] = $value;
-                return;
-            } else {
-                $this->config['appenders'][$name]['params'][$parts[1]] = $value;
-                return;
-            }
-        } // Three parts - this can only be a layout parameter
-        else if ($count == 3) {
-            if ($parts[1] == 'layout') {
-                $this->config['appenders'][$name]['layout']['params'][$parts[2]] = $value;
-                return;
-            }
-        }
-
-        trigger_error("log4php: Don't know how to parse the following line: \"$key = $value\". Skipping.");
-    }
-
-    /**
-     * Parses a renderer definition.
-     *
-     * Renderers are defined as:
-     * <pre>
-     * log4php.renderer.<renderedClass> = <renderingClass>
-     * </pre>
-     *
-     * @param string $key log4php.renderer.<renderedClass>
-     * @param string $value <renderingClass>
-     */
-    private function parseRenderer($key, $value) {
-        // Remove the appender prefix from key
-        $renderedClass = substr($key, strlen(self::APPENDER_PREFIX));
-        $renderingClass = $value;
-
-        $this->config['renderers'][] = compact('renderedClass', 'renderingClass');
-    }
-
-    /** Helper method. Returns true if $str begins with $sub. */
-    private function beginsWith($str, $sub) {
-        return (strncmp($str, $sub, strlen($sub)) == 0);
-    }
-
-
-}
-